EN
RT-MK1318 Laser glass sandblasting machine
Thickened profiles undergo aging treatment after welding, and the fixed surface of the side beam is processed by a gantry machine to ensure accuracy and stability
- Overview
- Technical Parameters
- Cutting Sample
- Related Products
Thickened profiles undergo aging treatment after welding, and the fixed surface of the side beam is processed by a gantry machine to ensure accuracy and stability
National standard high thickness profiles are not easily deformed during use.
During the operation of the machine, one side of the fan blows smoke, while the other side of the dust removal fan smokes, efficiently extracting dust and reducing environmental pollution.
The large enclosure adopts a structural steel lightweight skeleton design to achieve enclosed protection against laser cutting. Laser protective glass is installed on the front and left and right sides for easy observation of processing conditions; The large enclosure can effectively prevent light leakage and protect the safety of the operator.
|
Basic parameters |
RT-1318:(length)3230mm(width)2300mm(height)2150mm |
|---|---|
|
Area covered |
RT-1318:(length)3230mm(width)2300mm(height)2150mm |
|
Upper film height |
RT-1318:3500mm*2500mm |
|
Power requirements |
900mm/Adjustable |
|
Installation power |
Zero line,one fire,one ground wire,220V |
|
Maximum processing size |
4.5KW |
|
Minimum processing size |
RT-1318:1300mm*1800mm |
|
Laser power |
10*10mm |
|
Laser lifespan |
F-120-GT-10-N2-PRO+ |
|
Drilling glass thickness |
80000-100000 hours |
|
Drilling size |
1-10MM |
|
Width of sand |
Minimum 2mm hole,maximum 150mm |
|
Processing speed |
Maximum 80mm(wider customizable) |
|
Mechanical accuracy |
0-40M/min(meters/minute) |
|
Laser precision |
≤±0.25mm |
|
Graphic format |
EPS/DFF/PLT/CDR/AI/AC6 vector diagram |
Cutting Sample
